Wireless DMX Pen Transmitter

Wireless DMX Pen 3-pin Male XLR connector- transmitter.

Works with LC-512X-F (Receiver)
Power Supply included
Ready to use right out of the box
Turns any DMX Controller into a Wireless DMX Controller
Eliminate messy wires!

Note: A DMX Controller or Decoder required  but is not included.


Standard DMX512-Male XLR connector
Transmission without delay and no packet loss
Transceiver, auto-switching
Three-color LED display working status and parameters, one-touch operation
126 band Automatic frequency hopping, and automatically selects the band without interference, to ensure the reliability of communication
6 group can be set ID code, the user can use a separate wireless network in one place without any interference
Can operate in following modes.

  1.  1 to 1
  2. 1 to Many
  3. Parallel Transmission

Technical Specifications

Power supply (Included)5 v DC, 350 mA, via included power unit connected to 100-260 V, 50/60 Hz
Carrier frequency2.4 GHz ISM band, 78 channels
Coverage300 m (line-of-sight)
Parallel operationMax 6 transmitters
DMX connector3-pin Female XLR
DMX channels1 universe (512 channels)
Dimensions with antennaL 212mm x W 18mm x H 18mm
Weight210 g


  • 5CH DMX 512 Decoder 8 or 16 bit H-DMX2108A-5M-3

    Multiple Zone Control DMX decoder to control multiple RGB-W strips as one. Converts analog signal to universal standard DMX512/1990. Uses 5 channels with 256 shades of brightness.

  • 32CH LT-932-OLED DMX/RDM LED Color Decoder

    DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures.  Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.

    Add to cart More info


There are no reviews yet.

Be the first to review “Wireless DMX Pen Transmitter”

Your email address will not be published. Required fields are marked *