Wireless DMX Pen Receiver

Wireless DMX PEN 3-pin Female XLR connector – Receiver

Note: A DMX Decoder is required but is not included.

Features

Standard DMX512-Female XLR connector
Transmission without delay and no packet loss
Transceiver, auto-switching
Three-color LED display working status and parameters, one-touch operation
126 band Automatic frequency hopping, and automatically selects the band without interference, to ensure the reliability of communication
6 group can be set ID code, the user can use a separate wireless network in one place without any interference
Can operate in following modes 1 to 1 1 to Many Parallel Transmission

Power supply (Included)	5 v DC, 350 mA, via included power unit connected to 100-260 V, 50/60 Hz
Carrier frequency	2.4 GHz ISM band, 78 channels
Modulation	GFSK
Coverage	300 m (line-of-sight)
Parallel operation	Max 6 transmitters
DMX connector	3-pin Female XLR
DMX channels	1 universe (512 channels)
Dimensions with antenna	L 212mm x W 18mm x H 18mm
Weight	210 g

5CH DMX 512 Decoder 8 or 16 bit H-DMX2108A-5M-3
Multiple Zone Control DMX decoder to control multiple RGB-W strips as one. Converts analog signal to universal standard DMX512/1990. Uses 5 channels with 256 shades of brightness.
Out of Stock More info
32CH LT-932-OLED DMX/RDM LED Color Decoder
DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures. Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.
Add to cart More info

There are no reviews yet.

Be the first to review “Wireless DMX Pen Receiver”