Architectural Tape light FC266M20-6M-24V-X

No Spotting Architectural LED Flex Strip packs 78 2016 SMD LEDs per foot. Covered with opaque silicon cover, allows a very even and bright light. The Quattro Bright series 24VDC LED strip features a high lumen output of up to 90 lumens per watt. The dimmable LED Strip is available in Warm White (3000K) and Neutral white (4100K) with a coloring rendering index (CRI) of 90 or better! High CRI means better color definition in Jewelry display cases, food display cabinets and under cabinet lighting.

Type C Flex Border Strip is suitable for damp and wet locations (factory sealed) use and comes in 6 meters long (19.6 feet) long rolls.

Designed for the lighting professional, EvenBright LED Flex Strip can be used for applications such as architectural lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a VHB 3M tape backing for easy installation. Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply.

The 15mm (0.59”) wide LED Border Strip can be mounted into LED World’s (optional) Recessed mounting aluminum channel.

Note: This product requires an optional Class 2 Power Supply (not included).
Note: Accessories are not included with this product. See Accessories tab above

Features

Dimmable via LED World’s optional dimming solutions
View angle 120°
VHB 3M tape backing, UL recognized PCBs
Ultra bright surface mount LEDs
CRI 90 or better
Epistar super bright LEDs, perfect color consistency
Water Resistant
Long life of LEDs, LM-80 tested LEDs, 6000H testing
Even lighting, continuous length
Can be cut to size each 253mm intervals only

Technical Specifications

Watts/foot	4.2 W/ft
Max Voltage	24 VDC (Regulated/Class 2)
Amps/Roll	2.87
Brightness	420-450 Lumens / ft (30.5cm)
CRI	>90
Roll Size	6 Meters (19.6 Feet)
Light Source	266pcs/meter (39.37″) 2016 SMD LED
Dimensions	6000(L) x 15(W) x 10(H)mm (19.6′ x 0.59″ x 0.39″)
LEDs Type	2016 SMD LED
LED Angle	120°
Bend Radius	4″(100mm) Max, one flat plane
Lamp Life	>30,000 hours estimated average*
Mount	Smooth Surface/burrows free, Aluminum Profile
Operating Temperature	-25°C ~ +40°C (-13°F ~ 104°F)

Dimmable LED Drivers

Regulated LED Drivers

Accessories

3 Terminal WAGO 222-413 Splicing Connector
WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Add to cart More info
LED Low Voltage Mini Dimmer DIM-2430A
Low voltage mini LED dimmer can dim 12 or 24VDC LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.
Add to cart More info
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
Add to cart More info
5 Terminal WAGO 222-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Add to cart More info
4 terminal WAGO Connector H05-415
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
Add to cart More info