The H-DMX2108A-5M-3 is a 5-channel Low voltage DMX512 Decoder and Zone Controller (12V ~ 24VDC, 8A per channel output).
H-DMX2108A-5M-3 DMX decoder can be used in conjunction with a master DMX controller (Such as a HUEDA™ and STICK-D3) to control 1 run of low voltage RGB LED lighting (for each H-DMX2108A-5M-3).
When used with other DMX decoders, multiple runs can be coordinated to work together in perfect synchronization or be configured in zones.
Uses universal standard DMX512/1990.
Uses 5 channels with 256 shades of brightness. Indoor use only.
For more operation and setup details please refer Product Specs and Instruction PDF.
Important note: The maximum length of RGB/W LED Flex Strip attached to DMX Decoder should not exceed 20 linear feet (due to voltage drop resulting in color loss).
Features
| DMX 512 decoder, RDM function can inter-communicate between DMX master and decoder. e.g. you can set DMX decoder’s address by DMX master console |
| Metal housing, digital display for address data, easily to set and show DMX address |
| Multiple DMX in/out ports: RJ 45, XLR and hardwired screws terminals |
| Total 5 PWM output channels, common anode. Adjustable DMX channel quantity from 1CH~5CH |
| Adjustable PWM output resolution ratio 8bit , 16bit (for professional color accuracy) |
| Adjustable output PWM frequency from 500HZ ~ 9K HZ |
| Adjustable output dimming curve gamma value from 0.1 ~ 9.9 |
| Adjustable decoding mode |
Reviews
There are no reviews yet.