RGBW LED Receiver LS2 Mesh

LS2 RGB/W LED Receiver can control RGB or RGBW LED Flex Strips of either 12 or 24VDC (low voltage). LS2’s receiver can be used simultaneously to have multiple rolls RGB/W LED Flex Strips via auto-synchronizing RF.

The wireless controller and wireless remote can control (5 in 1) RGB, RGBW, CCT, RGB+CCT and single color LED strip. The LS2 controller features mesh network; repeats radio signal every 75 feet line of sight and auto-synchronizing function, allowing for long distance RF signal. LS2 controller uses 2.4GHz wireless technology (FCC). It consumes less power, transmits signal over a long distance and it is anti-interference.

Note that the LS2 receiver requires a master controller FUT089 Remote Controller.

Important note: Maximum length of RGB or RGBW LED Flex Strip attached to LS2 Receiver should not exceed 20 linear feet (due to voltage drop resulting in color loss).

Important! Use the LS2 only with regulated Class 2 Power Supplies. Failure to do so limited warranty will be void. 


LS2 RGBW LED Receiver Features

5 in 1 (RGB, RGBW, RGB+CCT, CCT and Single color) control
Transmits signal over longer distance up to 22.8m (75ft) clear line of sight.
Mesh network and auto synchronizing function
Less power consumption & easy setup

Technical Specifications

Input voltageDC12V-DC24V Class 2 regulated
Max Current Load5A/CH, Max 5A
Compatible Remote ControlFUT089
Remote Distance22.8m (75ft) clear line of sight
Working Temperature-20°C~40°C (-4°F~104°F)
DimensionL 124mm(4.8″) × W 38mm(1.49″) × H 23mm(0.9″)

12VDC Power Supplies

24VDC Power Supplies

Accessories

Master Color Controller

Reviews

There are no reviews yet.

Be the first to review “RGBW LED Receiver LS2 Mesh”

Your email address will not be published. Required fields are marked *