Water Resistant LED Flex Tape light – Quattro Bright QL-24V-Z-9X

Clear

Type C Quattro Bright LED Flex Strip is a low voltage (24VDC) LED lighting in a flexible ultra sleek thin PCB strip. Quattro Bright, Type C Flex Strip with weather resistant silicon cover is the Constant Current LED Strip. 24V Quattro Bright LED Flex Strip roll comes in 5 meters long (16.4 feet) allowing for long runs of LED lighting in cove applications and other applications where longer runs of lighting are needed. Type C Quattro Bright LED Flex Strip suitable for damp location use (IP64).

With Constant Current IC for each section, there is no need of constant current driver. Works with Standard Class 2 DC24V constant voltage power supply. The LED Strip IC will convert 24VDC to CC(Constant Current) for the LEDs. The CC Strip is cuttable like Standard Constant voltage strips.

Designed for the lighting professional, this lighting can be used for architectural lighting, sign letter lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation.

Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The base of the Flex Strips are flat and flexible and can be easily mounted onto most flat, non-conductive surfaces. Its small size and low voltage makes this lighting ideal for a wide range of applications.

Type C Quattro Bright 24VDC LED Flex Strip can be cut to size at each 7 LED intervals at marking points.

Note: This product requires an optional Class 2 Power Supply (not included)


Features

Constant Current IC
Weather Resistant Silicon Coated Strip for use in damp locations
Temperature sensor to Protect LED Strip from Temperature change
Increase/Decrease Current based on Temperature change
5630 SMD (Quattro Bright Series)
View Angle 120°
Package: 5 meters (16.4ft)
Little or no heat, low power consumption
Can be cut to size at marked intervals
Continuous length
Flexible LED Light Strips
Solid-state, high vibration resistant
Dimmable via any 24VDC PWM Control System or Dimmer
cULus Standard

Technical Specification

Max Voltage24 VDC (Class 2 Type power)
Watts/foot4.6 Watts
Light Source70pcs/meter (39.37″) 5630 LED
Dimensions5000(L) x 12(W) x 4(H)mm (16.4′ x 0.47″ x 0.15″)
LEDs Type5630 SMD
Max Length5 meters (16.4 feet)
LED Angle120°
Brightness426-457 Lumens / ft (30.5 cm) (Warm White)
472-503 Lumens / ft (30.5 cm) (Neutral White)
Bend RadiusMax 100mm (4″)
Lamp Life>35,000 hours estimated average*
IP RatingIP64 Type C

Dimmable LED Drivers

Regulated LED Drivers

Accessories

  • 3 Terminal WAGO 222-413 Splicing Connector

    WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • 5 Terminal WAGO 222-415 Splicing Connector

    WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

Aluminium Channel

Reviews

There are no reviews yet.

Be the first to review “Water Resistant LED Flex Tape light – Quattro Bright QL-24V-Z-9X”

Your email address will not be published. Required fields are marked *