LED Flexible Tape Light – 5.8W Constant Current HH-S2835X-120-24V-C

Clear

Quattro Bright High Efficiency LED Strip with IC HH-S2835X-120-24V-C features high bright 2835 LEDs for a light output exceeding 540lm per foot lumens and even light output.

LED Strip requires a constant voltage 24VDC (optional) LED Driver and can be dimmed with a one of LED World’s Dimmable Class 2 LED Driver. Each interval section on the LED Strip has a IC chip to regulate the current allowing for long runs of the strip without voltage drops. The 5.5 watts per foot, is a high output lumen LED strip with even light output. The Type A (indoor) Flex Strip comes in 5 meters long (16.4 feet) roll and is ideal for LED lighting in cove applications where longer runs of lighting are needed.

With Constant Current IC for each section, there is no need for constant current driver. IC Regulated LED Strip HH-S2835X-120-24V-C works with Standard Class 2 DC24V constant voltage power supply. In addition. it also compatible with Dimmable LED Drivers. The LED Strip IC will convert 24VDC to CC (Constant Current) for the LEDs. The CC Strip can be cut like Standard Constant voltage strips.

LED Flex Strip Lighting has a 3M tape backing for easy installation.

Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The LED Strip can be easily mounted into LED World’s Aluminum Channel profiles.

Note: This product requires an optional Class 2 Power Supply (not included)
Note: Accessories not included with this product but available in accessories section


Features

Constant Current IC (regulated for long Life of LEDs)
High density of LEDs for even light output – 36 LEDs per foot
View Angle 120°
Package: 5 meters (16.4ft)
2835 SMD (Quattro Bright Series)
Can be cut to size at marked intervals
Flexible LED Light Strips
Solid-state, high vibration resistant
Dimmable
cULus Standard

Technical Specifications

Max Voltage24 VDC (Class 2 Type power)
Watts/foot5.5 Watts
Amps/Roll3.6 Amps
Color Temp.3100K(Warm White), 4200K(Neutral White), 5500K (Pure White)
Light Source64pcs/meter (39.37″) 2835 LED
Dimensions5000(L) x 10(W) x 1.2(H)mm (16.4′ x 3/8″ x 0.04″)
LEDs Type2835 SMD LED
Max Length5 meters (16.4 feet)
LED Angle120°
Brightness540 Lumens / ft (30.5 cm)
Bend RadiusMax 100mm (4″)
Lamp Life>35,000 hours estimated average*
IP RatingIP20 Type A

Dimmable LED Drivers

Regulated LED Drivers

Accessories

  • LED Strip Connector S10W0

    S10W0 Splice Connector. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with Type A Flex Strip.

  • 3 Terminal WAGO 222-413 Splicing Connector

    WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • 4 terminal WAGO Connector M222415

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

  • X Connector SX10

    SX10 Single color 8mm X Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

  • 5 Terminal WAGO 222-415 Splicing Connector

    WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • L Connector SL10

    SL10 Single color 10mm L corner Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

  • T Connector ST10

    ST10 Single color 10mm T Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

  • LED Low Voltage Mini Dimmer DIM-2430A

    Low voltage mini LED dimmer can dim 12 or 24VDC  LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.

  • LED Strip Connector S10W1

    S10W1 Single Connector with two pigtail wires at end. For Use with Class two power supplies. Max 4 Amps, 12/24V DC

    This connector is only compatible with Type A Flex Strip.

  • LED Strip Connector S10W2

    S10W2 Double Connector with wires in between. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with Type A Flex Strip.

Aluminium Channel

Reviews

There are no reviews yet.

Be the first to review “LED Flexible Tape Light – 5.8W Constant Current HH-S2835X-120-24V-C”

Your email address will not be published. Required fields are marked *