Dim to Warm LED Tape light FA224M20-5M-24V-WW

New CCT Dimmable EvenBright LED Flex Strip adjusts CCT upon dimming (No Controllers required). 2700K at full brightness then adjustable up to 2200K via PWM dimming mimics the tungsten lighting. EvenBright™ strip packs 68 2016 SMD LEDs per foot. It allows a very even and bright light (unlike the older 5050 SMD LEDs caused spotting). In addition, The Quattro Bright series 24VDC LED strip  features a high powered 2016 LED. Features colouring rendering index (CRI) of  90 or better!

Type A Flex Strip is suitable for dry locations use and comes in 5 meters long (16.4 feet) long rolls. Ideal lighting where LED dots are not wanted to be seen when mounted in the optional Aluminum Profile.

Designed for the lighting professional, EvenBright CCT Dimmable LED Flex Strip can be used for applications such as architectural lighting, Restaurants, Cabinet lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation. Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply

The 10mm (3/8”) wide LED Strip can be easily mounted into LED World’s Aluminum Channel profiles. Hence, Its small size and low voltage makes this lighting ideal for a wide range of applications. Strip can be cut to size by at each 14 LED (24VDC) intervals at marking points only.

It is recommended to use CCT Dimmable EvenBright FA224M20-5M-24V-X LED Strip with LED World’s Aluminum profiles or Aluminum foil tape for better heat dissipation.

Note: This product requires an optional Class 2 Power Supply (not included).
Note: Accessories not included with this product but available in accessories section


Features

Dim to Warm White using PWM dimming
2700K at full brightness then dim down to a CCT white 2200K
View angle 120°
Double sided 3M tape backing, UL recognised PCBs
Ultra bright surface mount LEDs
CRI 90 or better
Epistar super bright LEDs, perfect color consistency
No RF interference
Even lighting, continuous length
Can be cut to size at marked intervals (14 LEDs apart)

Technical Specifications

Watts/foot5.5 W/ft
Max Voltage24 VDC (Regulated/Class 2)
Amps/Roll3.75
Brightness530-550 Lumens / ft (30.5cm)
CRI>90
Roll Size5 Meters (16.4 Feet)
Light Source224pcs/meter (39.37″) 2016 SMD LED
Dimensions5000(L) x 12(W) x 1.0(H)mm (16.4′ x 0.47″ x 3/100″)
LEDs Type2016 SMD LED
LED Angle120°
Bend Radius4″(100mm) Max, one flat plane
Lamp Life>30,000 hours estimated average*
MountSmooth Surface/burrows free, Aluminium Profile, Aluminium Foil Tape
Operating Temperature-25°C ~ +40°C (-13°F ~ 104°F)

Dimmable LED Drivers

Regulated LED Drivers

Accessories

  • LED Low Voltage Mini Dimmer DIM-2430A

    Low voltage mini LED dimmer can dim 12 or 24VDC  LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.

  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

  • 4 terminal WAGO Connector M222415

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

  • 5 Terminal WAGO 222-415 Splicing Connector

    WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • 3 Terminal WAGO 222-413 Splicing Connector

    WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

Reviews

There are no reviews yet.

Be the first to review “Dim to Warm LED Tape light FA224M20-5M-24V-WW”

Your email address will not be published. Required fields are marked *