Side Emitting LED Flexible Tape light – FA120M30-5M-12V-W

The new 2.9 Watt/ft Side emitting strip features 3014 Epistar SMD LEDs. Low voltage (12VDC) Side emitting LED lighting comes in a flexible ultra sleek thin PCB strip. IP22 rated type A Flex Strip is suitable for dry locations. Side emitting LED Strip available in pure white (5000K) and comes in 5m (16.4ft) roll.

Side Emitting LED Strip shines light out to one side of the Flex Strip, rather than straight up. This means that it can be concealed yet still illuminate something from the side. Ideal for creating lighted channel letters such that the lighting emits from the side rather than standard strips that emit light from the surface top.

Like our other LED Flex Strips, Side emitting strip has a 3M tape backing for easy installation. Cut-able LED Strip to size at each 3 LED intervals at marking points.

Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The base of the Flex Strips are flat and flexible. Easily mountable LED Strip onto clean dry surfaces free of burrows. Its small size and low voltage makes this lighting ideal for a wide range of applications.

Note: This product requires an optional Class 2 Power Supply (not included).
Note: Accessories not included with this product but available in accessories section


Features

Side Emitting 3014 Epistar SMD LEDs
LM-80 tested
CRI>90
Low power consumption and little heat generated
Dimmable and Trimmable at every 3 LEDs
Flexible LED light strips
Continuous length
Solid-state, high vibration resistant
Use in Channel letters

Technical Specifications

Roll Size5 Meters (16.4 Feet)
Max Voltage12 VDC (Regulated/Class 2)
Watt foot2.9 Watts
AMPs/Roll4 Amps
LED Type3014 SMD (Super Bright Series)
Light Source120pcs/meter  3014 SMD LED
CRI>90
Dimensions5000(L) x 8(W) x x(H)mm (16.4′ x 0.31″ x x”)
LED Angle120°
Brightness210-220 lumens / ft
Bend RadiusMax 50 mm (2”) on one Flat plane Axis
Lamp Life>25,000 hours estimated average*
IP RatingIP22 Type A
Operating Temperature-25°C ~ +40°C (-13°F ~ 104°F)

Dimmable LED Drivers

  • 40W 12VDC Dimmable Class 2 Driver E40L12DC-KO

    40 Watts 12 volt DC Electronic Dimmable Class 2 power supply is now available in a smaller compact in size with separate hard-wired compartments for easy install and greater reliability. The E40 electronic transformer can be dimmed a with standard TRIAC wall dimmer switch that is rated for “Low Voltage Magnetic” such as the Lutron DVLV-600P-WH.

  • 45W 12VDC Class 2 Dimmable LED Driver MD45W12VA

    45W 12VDC LED Driver MD45W12VA is the new Regulated Dimmable LED Driver. 45W 12VDC is the Lightweight, compact size, wall mountable power supply. Dimming LED drivers feature an integrated microprocessor that automatically senses and optimizes dimming performance based on the load and type of dimming technology being used.

  • 60W 12VDC Class 2 LED Dimmable Driver MD-012-060VT

    New Multi-Dim 12VDC Class 2 Regulated Dimmable 60 Watt (5A) constant voltage LED Driver features outstanding LED dimming performance that is compatible with wide range of dimmers.  Integrated microprocessor on driver automatically senses and optimizes performance based on the load and type of used dimming technology

  • 60W 12VDC Dimmable Class 2 Driver E60L12DC-KO

    12VDC 60 Watts Electronic Dimmable Class 2 power supply is the IP67 rated for use in indoor outdoor lighting applications

Regulated LED Drivers

Accessories

  • Aluminium Foil Tape 3M 425

    3M™ Aluminium Foil Tape 425 is a aluminium foil backed tape with a transparent synthetic acrylic adhesive, making this the best LED Strip mounting purpose foil product available for heat dissipation. Available in 1″ x 15 ft (25.4 mm x 4.57 meter) size.

  • 3 Terminal WAGO 222-413 Splicing Connector

    WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • 4 terminal WAGO Connector M222415

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

  • LED Low Voltage Mini Dimmer DIM-2430A

    Low voltage mini LED dimmer can dim 12 or 24VDC  LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.

  • 5 Terminal WAGO 222-415 Splicing Connector

    WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

Reviews

There are no reviews yet.

Be the first to review “Side Emitting LED Flexible Tape light – FA120M30-5M-12V-W”

Your email address will not be published. Required fields are marked *