LED Flex Tape light – Weather Resistant QL-F5630C30SA-X-12C

Clear

The new water-resistant Quattro Bright series LED Strip with CRI 90 or better features a 5630 SMD LED.  IC regulated for maximum light output and long life of LEDs. Although the LED Strip is a constant voltage 12VDC, each interval section on the LED Strip has a IC chip that regulates the current and temperature to protect the LED Strip for long life. The Type C Silicon coated Flex Strip comes in 4 meters long (13.12 feet) roll. Hence, it is ideal for the damp location use (IP67 rated). QL-F-5630C30SA-X-12C LED Strip features lumens of up to 440lm/ft .

With Constant Current IC for each section, there is no need of constant current driver. Moreover, it works with Standard Class 2 DC12V constant voltage power supply and dimmable LED Drivers.
Designed for the lighting professional, this lighting can be used for applications such as architectural lighting, under counter lighting, under cabinet lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation.

Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The LED Strip can be easily mounted into LED World’s Aluminium Channel profiles. Its small size and low voltage makes this lighting ideal for a wide range of applications.

Note: This product requires an optional Class 2 Power Supply (not included)
Note: Accessories not included with this product but available in accessories section


Features

Constant Current IC with weather resistant silicon Cover
 Temperature sensor to Protect LED Strip from Temperature change
90-100 lumens per watt
5630 SMD (Quattro Bright Series) CRI >90
View Angle 120°
Package: 4 meters (13.12ft)
Little or no heat, low power consumption
Can be cut to size at marked intervals
Continuous length
Flexible LED Light Strips
Solid-state, high vibration resistant
Dimmable via any 12 VDC PWM or Dimmable LED Driver
cULus Standard

Technical Specifications

Max Voltage12 VDC (Class 2 Type power)
Watts/foot4.3 Watts
Light Source60pcs/meter (39.37″) 5630 LED
Dimensions4000(L) x 12(W) x 4(H)mm (13.12′ x 0.47″ x 0.15″)
LEDs Type5630 SMD
Max Length4 meters (13.12 feet)
LED Angle120°
Brightness426-457 Lumens / ft (30.5 cm) (Warm White)
472-503 Lumens / ft (30.5 cm) (Neutral White)
Bend RadiusMax 100mm (4″)
Lamp Life>35,000 hours estimated average*
IP RatingIP67 Type C

Dimmable LED Drivers

Regulated LED Drivers

Accessories

  • 3 Terminal WAGO 222-413 Splicing Connector

    WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • LED Low Voltage Mini Dimmer DIM-2430A

    Low voltage mini LED dimmer can dim 12 or 24VDC  LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.

  • 5 Terminal WAGO 222-415 Splicing Connector

    WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • 4 terminal WAGO Connector M222415

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

Aluminium Channel

Reviews

There are no reviews yet.

Be the first to review “LED Flex Tape light – Weather Resistant QL-F5630C30SA-X-12C”

Your email address will not be published. Required fields are marked *