RGB LED Tape light – Side Emitting FA60M40-2.5M-SV-12V-RGB

Side Emitting RGB Strip FA60M40-2.5M-SV-12V-RGB Triple Bright LED Flex Strip lighting comes in a 8.2 feet (2.5 meters) long roll with side emitting Epistar tri-chip 4010 SMD LEDs in an ultra-thin strip. Standard RGB 5050 tri-chip is bendable on one axis emitting horizontally. The New side emitting Epistar tri-chip 4010 SMD LED is bendable on the horizontal while emitting light vertically. This allow more unique use of the RGB lighting when outlining channel letters, unique shapes that require a perpendicular emitting light.  Triple Bright Side Emitting, Type A (IP20) Flex Strip is suitable for dry locations.

Designed for the lighting designers, this lighting can be used for sign letter lighting, bar lighting, stage lighting, perimeter lighting and many other applications. Use with any of our RGB Controllers to dynamically color control of the RGB strip lighting or multiple RGB strips VIA DMX or wireless smart phone app controls. See our color controllers tab for optional color controllers.

Like our other LED Flex Strips, Triple Bright-Side has a 3M tape backing for easy installation. This strip can be cut to size by at each 3 LED intervals at marking points. The base of the Flex Strips are flat and flexible. Its small size and low voltage makes this lighting ideal for a wide range of applications. Please see PDF and instructions for further details.

Note: This product requires an optional Class 2 Power Supply and Color Controller (not included). Please call us during business hours for multiple roll setup questions.


Epistar tri-chip 4010 SMD LEDs with three colors in one chip
12 volts DC, 4.4 watts per foot
2.5 Meter roll (8.2ft)
Color changing RGB Triple Bright Side Emitting SMD LEDs. Little or no heat
Can be cut to size at marked intervals and rejoined by experienced personnel in low voltage lighting
Operating temperature: -25°C ~ 40°C (-13°F ~ 104°F)
Long life span of LED lights of up to 25,000 hours +

Technical Specifications

Roll Size2.5 Meters (8.2 feet)
Max Voltage12 VDC (Regulated/Class 2)
Watt foot4.4 Watts
Watts/Roll36 W (3 Amps Roll)
Max Current 60mA per Segment Max
Light Source60 pcs/meter 4010 Side Emitting SMD RGB (3in1)
Dimensions5000(L) x 10 (W) x 1.5(H)mm (16.4′ x 0.39″ x 0.059″)
LEDs Type4010 SMD Side Emitting LED
LED Angle120°
Mounting3M Adhesive Tape, Type A
Lamp Life>30,000 hours
Operating Temperature-25°C ~ +40°C (-13°F ~ 104°F)

Regulated LED Drivers


Master Color Controllers

Color DMX Decoders

Color RF(Wireless) Receivers


There are no reviews yet.

Be the first to review “RGB LED Tape light – Side Emitting FA60M40-2.5M-SV-12V-RGB”

Your email address will not be published. Required fields are marked *