No Spotting – Neoflex LED Tape Light

No Spot LED Strip comes in a light optimized water-resistant silicone casing using the newest 2216 SMD LED Chips. The high density 300 LED per meter (or 91 LEDs per foot) allows for an even light without the use of a channel and lens.  The low voltage 24VDC LED lighting can be cut to size (following the enclosed instruction) with the included end caps and clips in the package.  The Roll is sold in it maximum length of in 5 meters long (16.4 feet).

Ideal lighting Strip for applications such as architectural lighting, Cove lighting, concealed lighting, perimeter lighting and many other applications.

Our No-spotting LED Strips come with connector wire, End Caps and mounting clips. Included accessory makes it easy connection to the Class 2 LED Power supply. Easily mountable into LED World’s optional 13mm U Channel profile (PVC Channel).

Note: This product requires an optional Class 2 Power Supply (not included).

Note: More Accessories available in accessories section.


Weather Resistant. Light optimized Opaque Silicon Strip
2216 SMD (Quattro Bright Series)
View Angle 160°
Package: 5 meters (16.4ft)
Little or no heat, low power consumption
Can be cut to size (refer instruction sheet)
Continuous length
Solid-state, high vibration resistant
High CRI LEDs 90 for better color rendition
cULus Standard

Technical Specifications

Max Voltage24 VDC (Class 2 Type power)
Watts/foot3.7 Watts
Light Source300pcs/meter (39.37″)
Dimensions5000(L) x 10(W) x 8(H)mm (16.4′ x 0.39″ x 0.31″)
LEDs Type2216 SMD
Max Length5 meters (16.4 feet)
LED Angle160°
Brightness200~250 Lumens / ft (30.48 cm)
Lamp Life>30,000 hours estimated average*
IP RatingIP67 Type C

Dimmable LED Drivers

Regulated LED Drivers


There are no reviews yet.

Be the first to review “No Spotting – Neoflex LED Tape Light”

Your email address will not be published. Required fields are marked *