LED Flexible Water Resistant Tape light – SMD 2835 FC60M28-10M-24V-X

The new Bright Plus series Water Resistant LED Flex Strip 24VDC FC60M28-10M-24V-X LED strips features the high-powered 2835 SMD LED. It is  40% brighter than the 2835 SMD LED. Moreover, it has a high lumen output of up to 100 lumens per watt. The dimmable LED Strip features CRI>80 and is available in Neutral white (4000 to 4200K) and Warm White (2900 to 3100K). Available in 10 meter (32.8 feet) length roll.

Silicon covered IP62 rated LED Strip suitable for use in damp locations. All of our Flex Strips come with 12″ (30.5cm) lead wires to be powered with our Class 2 power supply.

Size of roll and maximum length: 10 meter (32.8 feet) roll

LED World’s LED Strip Lighting can be used for under counter lighting,  architectural lighting, cove lighting, toe kick lighting and many other applications. In addition, Its small size and low voltage makes this lighting ideal for a wide range of applications.

LED Strip available in Warm White/Neutral White Color.

Note: This product requires an optional Class 2 Power Supply (not included).
Note: Accessories are not included with this product. See Accessories tab above.


Features

IP62 rated for use in damp locations
Dimmable via LED World’s optional dimming solutions
Double sided 3M tape
Low power consumption and little heat produced
Flexible LED light strips
Long life of high output LEDs
No RF interference
Solid state lighting
Super Bright 2835 SMD LEDs

Technical Specifications

Watts/foot2.2 W/ft
Max Voltage24 VDC (Class 2 Type power)
Amps/Roll3 Amps
Brightness200~220 Lumens / ft (30.5 cm) (Warm White)
Light Source60pcs/meter (39.37″) 2835 LED
Dimensions10,000(L) x 12(W) x 4(H)mm (32.8′ x 0.47″ x 0.15″)
LEDs Type2835 SMD
Max Length10 meters (32.8 feet)
LED Angle120°
Bend RadiusMax 100mm (4″)
Lamp Life>40,000 hours estimated average*
IP RatingIP62 Type C

Dimmable LED Drivers

  • 288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2

    New efficient and reliable multi output 24VDC 288Watt (3 x 96W) Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming.

    Compatible with Forward phase, Magnetic low voltage, ELV, Triac and 0-10V Dimmers (see compatibility list of dimmers).

    Add to cart More info
  • 192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2

    New efficient and reliable multi output 24VDC 192Watt (2 x 96W) Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming.

    Compatible with Forward phase, Magnetic low voltage, ELV, Triac and 0-10V Dimmers (see compatibility list of dimmers).

    Add to cart More info
  • 96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2

    New efficient and reliable 24VDC 96Watt Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming.

    Compatible with Forward phase, Magnetic low voltage, Triac and 0-10V Dimmers (see compatibility list of dimmers).

    Add to cart More info
  • 60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2

    New efficient and reliable 24VDC 60Watt Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming.

    Compatible with Forward phase, Magnetic low voltage, ELV, Triac and 0-10V Dimmers (see compatibility list of dimmers).

    Add to cart More info

Regulated LED Drivers

  • 96W 24VDC Class 2 LED Power Supply with Plug

    96 Watt YHY-24004000 LED Class 2 24VDC Power Supply: AC/DC adapter, compact desktop sized, power supply for indoor use (dry) only. Features an input voltage of 100~240VAC, 50~ 60Hz and comes with a barrel type (coaxial) output connector (center is +).

    96W LED power supply features short circuit protection, over current protection and over voltage protection.

    Add to cart More info

Accessories

  • T Connector ST10

    ST10 Single color 10mm T Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

    Add to cart More info
  • 3 Terminal WAGO 222-413 Splicing Connector

    WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    Add to cart More info
  • LED Low Voltage Mini Dimmer DIM-2430A

    Low voltage mini LED dimmer can dim 12 or 24VDC  LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.

    Add to cart More info
  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

    Add to cart More info
  • 5 Terminal WAGO 222-415 Splicing Connector

    WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    Add to cart More info
  • 4 terminal WAGO Connector H05-415

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

    Add to cart More info
  • L Connector SL10

    SL10 Single color 10mm L corner Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

    Add to cart More info
  • X Connector SX10

    SX10 Single color 8mm X Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

    Add to cart More info

Aluminium Channel

  • Deep Aluminum Channel

    Deep LED Aluminium profile is 1 meter (3.28 feet) long. Width is 13.59mm and Height is 19.9mm.

    Add to cart More info
  • Aluminum Profile Corner Round

    Length sizes for Corner Round LED Aluminium Channel is available in 1 meter length. Width is 16mm and Height is 16mm.

    Add to cart More info
  • Aluminum Recessed Channel

    Recessed Aluminium Profile available in 1 meter (3.28 feet). Width is 17.1 mm and Height is 8.6mm.

    Select options
    More info
  • Wide Standard Aluminum Channel

    Standard Wide Profile available in 1 meter (3.28 feet) long length. Width is 23.5mm and Height is 11mm.

    Add to cart More info
  • Aluminum LED Profile Round AC-R008

    Aluminium profile round AC-R008 with PMMA Opal matter diffuser can be mounted with optional wall bracket to walls or can be hanged to create custom linear light Pendants up to 2 meters (6.56 ft) long. Round Aluminum profile available in 1 meter (3.28ft) and 2 meter (6.56ft) long length.

    Select options
    More info
  • Corner Cove Aluminum LED Profile AC-3030G

    The Corner Cove Aluminum LED profile AC-3030G with Opaque diffuser lens to create custom linear light Pendants up to 2 meters (6.56 ft) long. Can also be used in Wall Corner and cove lighting for unique Corner Lighting effect. Furthermore, Corner Cove Aluminum LED Profile comes with Opaque cover profile cover for spotless lighting effect. In order to hang on the ceiling use the optional suspension kit available in accessories section.

    Select options
    More info

Reviews

There are no reviews yet.

Be the first to review “LED Flexible Water Resistant Tape light – SMD 2835 FC60M28-10M-24V-X”

Your email address will not be published. Required fields are marked *