LED Flex Tape light - FA60M50-5M-24V-X

Triple Bright LED Flex Strip is a low voltage (24VDC) LED lighting in a flexible ultra sleek thin PCB strip. Triple Bright, Type A Flex Strip is suitable for dry locations. 24V Triple Bright LED Flex Strip roll comes in 5 meters long (16.4 feet) allowing for long runs of LED lighting in cove applications and other applications where longer runs of lighting are needed. Available in following color temperatures: Warm White-3100K, Deep Warm White-2700K and Day White-5200K with CRI (Color Renditioning Index) of 80 or better.

Designed for the lighting professional, this lighting can be used for architectural lighting, sign letter lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation.

Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The base of the Flex Strips are flat and flexible and can be easily mounted onto most flat, clean dry surfaces free of burrows. Its small size and low voltage makes this lighting ideal for a wide range of applications. Strip can be cut to size by at each 6 LED (24VDC) intervals at marking points.

Note: This product requires an optional Class 2 Power Supply (not included).

Features

Dimmable via LED World’s optional dimming solutions
Double sided 3M tape
Low power consumption and little heat generated
Flexible LED light strips
Long life of LEDs
No RF interference
Solid state lighting
No ultra violet (UV/IR) radiation

Technical Specifications

Roll Size	5 Meters (16.4 Feet)
Max Voltage	24 VDC (Regulated/Class 2)
Watts/foot	4.4 Watts
AMPs/Roll	3A
Max Current/Ft	185mA
Light Source	60pcs/meter (39.37″) 5050 SMD LED
Dimensions	5000(L) x 10(W) x 2.5(H)mm (16.4′ x 25/64″ x 3/32″)
LEDs Type	5050 SMD LED
LED Angle	120°
Brightness	396-418 Lumens / ft (30.5cm)
Bend Radius	4″(100mm) Max, one flat plane
Lamp Life	>25,000 hours estimated average*
Mount	Smooth Surface/burrows free
Operating Temperature	-25°C ~ +40°C (-13°F ~ 140°F)

Dimmable LED Drivers

60W 24VDC Class 2 Dimmable LED Driver MD-024-060VTH
New Multi-Dim Regulated Dimmable 60 Watt (2.5A) Class 2 constant voltage 24VDC LED Driver features outstanding LED dimming performance. 60W 24VDC Class 2 Dimmable LED Driver uses Pulse-Width Modulation (PWM) dimming for smooth dimming. 24VDC Dimmable driver is compatible with wide range of dimmers. For instance compatible with Forward phase, Magnetic low voltage, Triac Dimmers (see compatibility list of dimmers). For indoor use only.
Add to cart More info
Triac Dimmable 96W 24VDC Class 2 LED Driver MD-024-096VT
New Multi-Dim Regulated Dimmable 96 Watt (4A) Class 2 constant voltage 24VDC LED Driver features outstanding LED dimming performance that use Pulse-Width Modulation (PWM) dimming for smooth dimming.Ccompatible with wide range of dimmers. Compatible with a wide range of dimmers; Forward phase, Magnetic low voltage, Triac Dimmers (see compatibility list of dimmers). For indoor use only.
Add to cart More info
96W 24VDC Dimmable Class 2 Driver E96L24DC-KO
96 Watts 24 volt DC Electronic Dimmable Class 2 power supply is the IP67 rated and fully operational in wet and damp applications
Add to cart More info
192W 24VDC Class 2 Dimmable LED Driver MD-024-192VTH
New Multi-Dim Regulated Dimmable 192 Watt (2 x 4A) Class 2 constant voltage 24VDC LED Driver features outstanding LED dimming performance. 192W 24VDC Class 2 Dimmable LED Driver uses Pulse-Width Modulation (PWM) dimming for smooth dimming. Dimmable driver is compatible with wide range of dimmers. Compatible with Forward phase, Magnetic low voltage, Triac Dimmers (see compatibility list of dimmers). For indoor use only.
Add to cart More info
96W x 3 24VDC Multi-Output Dimmable Class 2 LED Driver EZJ288L24DC
Multi-Output 96W x 3 24VDC Dimmable Class 2 Driver is available in a compact in size junction box. Moreover, with separate hardwired compartments for easy install and greater reliability. The electronic transformer can be dimmed a with standard TRIAC wall dimmer switch.
Add to cart More info
0-10V 96W 24VDC Class 2 Driver CVD96L24DC
The 96 Watt 24VDC CVD96L24DC is a Class 2 Constant Voltage LED Driver with 0-10V dimming availability. The UL Listed type enclosures has a built-in junction box on both input and output sides for easy hardwired installation. These drivers are IP65 rated and are suitable for both indoor and outdoor installations.
Add to cart More info

Regulated LED Drivers

96W 24VDC Class 2 Driver CVN96L24DC
The 96 Watt 24VDC CVN96L24DC LED Driver is a Constant Voltage regulated Class 2 LED Driver. It features knock outs for easy hardwired installation. As a standalone unit this conduit ready LED driver will enable complete installation without having to install external junction boxes. It saves your invaluable time and money in installation and approvals.
Add to cart More info
200W 24VDC Class 2 LED Power Supply XLD200B-224V-FC
24V 200W Class 2 LED Power supply is the UL listed, IP65 rated ideal for use indoor-outdoor applications
Add to cart More info
96W 24VDC Class 2 Plugin LED Power Supply
96 Watt G961DA-240400-1 LED Class 2 24VDC Power Supply: AC/DC adapter, compact desktop sized, power supply for indoor use (dry) only. Features an input voltage of 120~240VAC, 50~ 60Hz and comes with a barrel type (coaxial) output connector (center is +).
Add to cart More info

Accessories

X Connector SX10
SX10 Single color 8mm X Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.
Add to cart More info
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
Add to cart More info
4 terminal WAGO Connector H05-415
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
Add to cart More info
LED Strip Connector S10W1
S10W1 Single Connector with two pigtail wires at end. For Use with Class two power supplies. Max 4 Amps, 12/24V DC
This connector is only compatible with Type A Flex Strip.
Add to cart More info
L Connector SL10
SL10 Single color 10mm L corner Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.
Add to cart More info
DC10M Dice Connector Kit for 10mm LED Strip
DC10M Dice middle connector makes it easy to join two single color 10mm wide LED strips together. The kit comes complete with 5 connectors and a mini screw driver. Use screw driver to tighten the connectors to the strips PCB connection pads. Use only with LED World’s 10mm wide Type A Flex Strip (No coating or cover).
Not compatible with the Evenbright Series.
Max 5 Amps, 12/24V DC low voltage only. Use only with Class 2 power supply.
Add to cart More info
LED Strip Connector S10W2
S10W2 Double Connector with wires in between. For use with Class two power supplies. Max 4 Amps, 12/24V DC.
This connector is only compatible with Type A Flex Strip.
Add to cart More info
5 Terminal WAGO 222-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Add to cart More info
T Connector ST10
ST10 Single color 10mm T Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.
Add to cart More info
DC10E Dice Connector Kit for LED Strip
DC10E Dice end power connector makes it easy to attach two pigtail wires to a single color 10mm wide LED strips. The kit includes 5 connectors with pigtail wires already attached and a mini screw driver. Use screw driver to tighten the connector to the strips PCB connection pads. Use only with LED World’s 10mm wide Type A Flex Strip (No coating or cover).
Not compatible with the Evenbright Series.
For Use with Class 2 Power Supplies: Max 5 Amps, 12/24V DC low voltage only.
Add to cart More info
LED Low Voltage Mini Dimmer DIM-2430A
Low voltage mini LED dimmer can dim 12 or 24VDC LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.
Add to cart More info
3 Terminal WAGO 222-413 Splicing Connector
WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Add to cart More info
LED Strip Connector S10W0
S10W0 Splice Connector. For use with Class two power supplies. Max 4 Amps, 12/24V DC.
This connector is only compatible with Type A Flex Strip.
Add to cart More info

Aluminium Channel

Bendable Aluminium LED Profile
Bendable Aluminium LED Profile (AC-ALP1806-M) is made from high quality Aviation 6063-T5 aluminium alloy with Double-Anodized, and is designed for flexible LED strips that are 8~12mm wide. Ideal LED profile for straight and curved for display counter and cabinet.
Out of Stock More info
Deep Aluminium Channel
Deep LED Aluminium profile is 1 meter (3.28 feet) long. Width is 13.59mm and Height is 19.9mm.
Add to cart More info
Aluminium Profile Corner Round
Length sizes for Corner Round LED Aluminium Channel is available in 1 meter length. Width is 16mm and Height is 16mm.
Add to cart More info
Aluminium Recessed Channel
Recessed Aluminium Profile available in 1 meter (3.28 feet). Width is 17.1 mm and Height is 8.6mm.
Add to cart More info
Wide Standard Aluminium Channel
Standard Wide Profile available in 1 meter (3.28 feet) long length. Width is 23.5mm and Height is 11mm.
Add to cart More info
Aluminium LED Profile Round AC-R008
Aluminium profile round AC-R008 with PMMA Opal matter diffuser can be mounted with optional wall bracket to walls or can be hanged to create custom linear light Pendants up to 2 meters (6.56 ft) long. Round Aluminum profile available in 1 meter (3.28ft) and 2 meter (6.56ft) long length.
Select options

More info