LED Flexible Tape light – SMD 3528 FA60M28-10M-24V-X

The new 24VDC FA60M28-10M-24V-X LED strips features the new high power 2835 SMD LED that is 40% brighter than the 3528 SMD LED and that has a high lumen output of up to 100 lumens  per watt. The dimmable LED Strip is available in Neutral white (4000 to 4200K) CRI 80 and Warm White (2900 to 3100K) CRI 80+. The low voltage (24VDC) LED strip can be cut at marked intervals (6 LED cutting points) and comes in 10 meter (32.8 feet) roll. It is suitable for dry locations and has a 3M tape backing for easy installation. It can be mounted onto most flat, clean dry surfaces free of burrows. All of our Flex Strips come with 12″ (30.5cm) lead wires to be powered with our Class 2 power supply.

Size of roll and maximum length: 10 meter (32.8 feet) roll

LED World’s LED Strip Lighting can be used for under counter lighting,  architectural lighting, cove lighting, toe kick lighting and many other applications. Its small size and low voltage makes this lighting ideal for a wide range of applications.

LED Strip available in Warm White/Pure White Color

Note: This product requires an optional Class 2 Power Supply (not included).


Features

Dimmable via LED World’s optional dimming solutions
Double sided 3M tape
Low power consumption and little heat produced
Flexible LED light strips
Long life of high output LEDs
No RF interference
Solid state lighting
Super Bright 2835 SMD LEDS

Technical Specifications

Roll Size10 Meters (32.8 feet)
Max Voltage24 VDC (regulated)
Watt foot2.2
AMPs/Roll2 Amps
Light Source60pcs/meter (39.37″) 2835 SMD LED
Dimensions10000(L) x 10(W) x 1(H)mm (32.8′ x 25/64″ x 0.03″)
Max Length10 Meters (32.8 feet)
LED Angle120°
Brightness200-220 Lumens / ft
Lamp Life>50,000 hours estimated average*
IP RatingIP20 Type A
MountSmooth Clean Surface – burrows free
Operating Temperature-25°C ~ +40°C (-13°F ~ +104°F)

Dimmable LED Drivers

  • 60W 24VDC Class 2 Dimmable LED Driver MD-024-060VTH

    New Multi-Dim Regulated Dimmable 60 Watt (2.5A) Class 2 constant voltage 24VDC LED Driver features outstanding LED dimming performance.  60W 24VDC Class 2 Dimmable LED Driver uses Pulse-Width Modulation (PWM) dimming for smooth dimming. 24VDC Dimmable driver is compatible with wide range of dimmers.  For instance compatible with Forward phase, Magnetic low voltage, Triac Dimmers (see compatibility list of dimmers). For indoor use only.

  • SMT-024-096VTH Multi-dim driver

    Triac Dimmable 96W 24VDC Class 2 LED Driver MD-024-096VT

    New Multi-Dim Regulated Dimmable 96 Watt (4A) Class 2 constant voltage 24VDC LED Driver features outstanding LED dimming performance that use Pulse-Width Modulation (PWM) dimming for smooth dimming.Ccompatible with wide range of dimmers.   Compatible with a wide range of dimmers; Forward phase, Magnetic low voltage, Triac Dimmers (see compatibility list of dimmers). For indoor use only.

  • 96W 24VDC Dimmable Class 2 Driver E96L24DC-KO

    96 Watts 24 volt DC Electronic Dimmable Class 2 power supply is the IP67 rated and fully operational in wet and damp applications

  • Multi Dim SMT-024-192VTH LED driver

    192W 24VDC Class 2 Dimmable LED Driver MD-024-192VTH

    New Multi-Dim Regulated Dimmable 192 Watt (2 x 4A) Class 2 constant voltage 24VDC LED Driver features outstanding LED dimming performance. 192W 24VDC Class 2 Dimmable LED Driver uses Pulse-Width Modulation (PWM) dimming for smooth dimming. Dimmable driver is compatible with wide range of dimmers.  Compatible with Forward phase, Magnetic low voltage, Triac Dimmers (see compatibility list of dimmers). For indoor use only.

  • 96W x 3 24VDC Multi-Output Dimmable Class 2 LED Driver EZJ288L24DC

    Multi-Output 96W x 3 24VDC Dimmable Class 2 Driver is available in a compact in size junction box. Moreover, with separate hardwired compartments for easy install and greater reliability. The electronic transformer can be dimmed a with standard TRIAC wall dimmer switch.

  • 0-10V 96W 24VDC Class 2 Driver CVD96L24DC

    The 96 Watt 24VDC CVD96L24DC is  a Class 2 Constant Voltage LED Driver with 0-10V dimming availability.  The UL Listed type enclosures has a built-in junction box on both input and output sides for easy hardwired installation. These drivers are IP65 rated and are suitable for both indoor and outdoor installations.


Regulated LED Drivers

Accessories

  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

  • 4 terminal WAGO Connector H05-415

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

  • T Connector ST10

    ST10 Single color 10mm T Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

  • 3 Terminal WAGO 222-413 Splicing Connector

    WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • LED Low Voltage Mini Dimmer DIM-2430A

    Low voltage mini LED dimmer can dim 12 or 24VDC  LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.

  • DC10M Dice Connector Kit for 10mm LED Strip

    DC10M Dice middle connector makes it easy to join two single color 10mm wide LED strips together. The kit comes complete with 5 connectors and a mini screw driver. Use screw driver to tighten the connectors to the strips PCB connection pads. Use only with LED World’s 10mm wide Type A Flex Strip (No coating or cover).

    Not compatible with the Evenbright Series.

    Max 5 Amps, 12/24V DC low voltage only. Use only with Class 2 power supply.

  • DC10E Dice Connector Kit for LED Strip

    DC10E Dice end power connector makes it easy to attach two pigtail wires to a  single color 10mm wide LED strips. The kit includes 5 connectors with pigtail wires already attached and a mini screw driver. Use screw driver to tighten the connector to the strips PCB connection pads. Use only with LED World’s 10mm wide Type A Flex Strip (No coating or cover).

    Not compatible with the Evenbright Series.

    For Use with Class 2 Power Supplies: Max 5 Amps, 12/24V DC low voltage only.

  • X Connector SX10

    SX10 Single color 8mm X Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

  • LED Strip Connector S10W1

    S10W1 Single Connector with two pigtail wires at end. For Use with Class two power supplies. Max 4 Amps, 12/24V DC

    This connector is only compatible with Type A Flex Strip.

  • LED Strip Connector S10W0

    S10W0 Splice Connector. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with Type A Flex Strip.

  • L Connector SL10

    SL10 Single color 10mm L corner Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

  • LED Strip Connector S10W2

    S10W2 Double Connector with wires in between. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with Type A Flex Strip.

  • 5 Terminal WAGO 222-415 Splicing Connector

    WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

Aluminium Channel

Reviews

There are no reviews yet.

Be the first to review “LED Flexible Tape light – SMD 3528 FA60M28-10M-24V-X”

Your email address will not be published. Required fields are marked *

Description

The new 24VDC FA60M28-10M-24V-X LED strips features the new high power 2835 SMD LED that is 40% brighter than the 3528 SMD LED and that has a high lumen output of up to 100 lumens  per watt. The dimmable LED Strip is available in Neutral white (4000 to 4200K) CRI 80 and Warm White (2900 to 3100K) CRI 80+. The low voltage (24VDC) LED strip can be cut at marked intervals (6 LED cutting points) and comes in 10 meter (32.8 feet) roll. It is suitable for dry locations and has a 3M tape backing for easy installation. It can be mounted onto most flat, clean dry surfaces free of burrows. All of our Flex Strips come with 12″ (30.5cm) lead wires to be powered with our Class 2 power supply.

Size of roll and maximum length: 10 meter (32.8 feet) roll

LED World’s LED Strip Lighting can be used for under counter lighting,  architectural lighting, cove lighting, toe kick lighting and many other applications. Its small size and low voltage makes this lighting ideal for a wide range of applications.

LED Strip available in Warm White/Pure White Color

Note: This product requires an optional Class 2 Power Supply (not included).


Features

Dimmable via LED World’s optional dimming solutions
Double sided 3M tape
Low power consumption and little heat produced
Flexible LED light strips
Long life of high output LEDs
No RF interference
Solid state lighting
Super Bright 2835 SMD LEDS
Technical Specs

Technical Specifications

Roll Size10 Meters (32.8 feet)
Max Voltage24 VDC (regulated)
Watt foot2.2
AMPs/Roll2 Amps
Light Source60pcs/meter (39.37″) 2835 SMD LED
Dimensions10000(L) x 10(W) x 1(H)mm (32.8′ x 25/64″ x 0.03″)
Max Length10 Meters (32.8 feet)
LED Angle120°
Brightness200-220 Lumens / ft
Lamp Life>50,000 hours estimated average*
IP RatingIP20 Type A
MountSmooth Clean Surface – burrows free
Operating Temperature-25°C ~ +40°C (-13°F ~ +104°F)
Power Supplies

Dimmable LED Drivers

  • 60W 24VDC Class 2 Dimmable LED Driver MD-024-060VTH

    New Multi-Dim Regulated Dimmable 60 Watt (2.5A) Class 2 constant voltage 24VDC LED Driver features outstanding LED dimming performance.  60W 24VDC Class 2 Dimmable LED Driver uses Pulse-Width Modulation (PWM) dimming for smooth dimming. 24VDC Dimmable driver is compatible with wide range of dimmers.  For instance compatible with Forward phase, Magnetic low voltage, Triac Dimmers (see compatibility list of dimmers). For indoor use only.

  • SMT-024-096VTH Multi-dim driver

    Triac Dimmable 96W 24VDC Class 2 LED Driver MD-024-096VT

    New Multi-Dim Regulated Dimmable 96 Watt (4A) Class 2 constant voltage 24VDC LED Driver features outstanding LED dimming performance that use Pulse-Width Modulation (PWM) dimming for smooth dimming.Ccompatible with wide range of dimmers.   Compatible with a wide range of dimmers; Forward phase, Magnetic low voltage, Triac Dimmers (see compatibility list of dimmers). For indoor use only.

  • 96W 24VDC Dimmable Class 2 Driver E96L24DC-KO

    96 Watts 24 volt DC Electronic Dimmable Class 2 power supply is the IP67 rated and fully operational in wet and damp applications

  • Multi Dim SMT-024-192VTH LED driver

    192W 24VDC Class 2 Dimmable LED Driver MD-024-192VTH

    New Multi-Dim Regulated Dimmable 192 Watt (2 x 4A) Class 2 constant voltage 24VDC LED Driver features outstanding LED dimming performance. 192W 24VDC Class 2 Dimmable LED Driver uses Pulse-Width Modulation (PWM) dimming for smooth dimming. Dimmable driver is compatible with wide range of dimmers.  Compatible with Forward phase, Magnetic low voltage, Triac Dimmers (see compatibility list of dimmers). For indoor use only.

  • 96W x 3 24VDC Multi-Output Dimmable Class 2 LED Driver EZJ288L24DC

    Multi-Output 96W x 3 24VDC Dimmable Class 2 Driver is available in a compact in size junction box. Moreover, with separate hardwired compartments for easy install and greater reliability. The electronic transformer can be dimmed a with standard TRIAC wall dimmer switch.

  • 0-10V 96W 24VDC Class 2 Driver CVD96L24DC

    The 96 Watt 24VDC CVD96L24DC is  a Class 2 Constant Voltage LED Driver with 0-10V dimming availability.  The UL Listed type enclosures has a built-in junction box on both input and output sides for easy hardwired installation. These drivers are IP65 rated and are suitable for both indoor and outdoor installations.


Regulated LED Drivers

Accessories

Accessories

  • 5 Terminal WAGO 222-415 Splicing Connector

    WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • LED Strip Connector S10W0

    S10W0 Splice Connector. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with Type A Flex Strip.

  • DC10E Dice Connector Kit for LED Strip

    DC10E Dice end power connector makes it easy to attach two pigtail wires to a  single color 10mm wide LED strips. The kit includes 5 connectors with pigtail wires already attached and a mini screw driver. Use screw driver to tighten the connector to the strips PCB connection pads. Use only with LED World’s 10mm wide Type A Flex Strip (No coating or cover).

    Not compatible with the Evenbright Series.

    For Use with Class 2 Power Supplies: Max 5 Amps, 12/24V DC low voltage only.

  • LED Strip Connector S10W2

    S10W2 Double Connector with wires in between. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with Type A Flex Strip.

  • LED Low Voltage Mini Dimmer DIM-2430A

    Low voltage mini LED dimmer can dim 12 or 24VDC  LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.

  • X Connector SX10

    SX10 Single color 8mm X Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

  • 4 terminal WAGO Connector H05-415

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

  • T Connector ST10

    ST10 Single color 10mm T Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

  • DC10M Dice Connector Kit for 10mm LED Strip

    DC10M Dice middle connector makes it easy to join two single color 10mm wide LED strips together. The kit comes complete with 5 connectors and a mini screw driver. Use screw driver to tighten the connectors to the strips PCB connection pads. Use only with LED World’s 10mm wide Type A Flex Strip (No coating or cover).

    Not compatible with the Evenbright Series.

    Max 5 Amps, 12/24V DC low voltage only. Use only with Class 2 power supply.

  • LED Strip Connector S10W1

    S10W1 Single Connector with two pigtail wires at end. For Use with Class two power supplies. Max 4 Amps, 12/24V DC

    This connector is only compatible with Type A Flex Strip.

  • L Connector SL10

    SL10 Single color 10mm L corner Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

  • 3 Terminal WAGO 222-413 Splicing Connector

    WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

Aluminium Channel

Aluminium Channel

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “LED Flexible Tape light – SMD 3528 FA60M28-10M-24V-X”

Your email address will not be published. Required fields are marked *