50ft Long Run Tape light – FA60M28-15.2M-24V-X

The new 24VDC Long Run Series LED Flex Strip Light FA60M28-15.2M-24V-X comes in 50ft (15.2m) length roll.  Featuring 2835 SMD LED, which is 40% brighter than the 3528 LED. Also, it has a high lumen output of up to 90 lumens per watt. The dimmable long run LED Flex Strip Light is available in Neutral white (4200K) and Warm White (3000K). Cut the low voltage (24VDC) LED strip at marked intervals (at each 6 LEDs).  It is suitable for dry locations and has a 3M tape backing for easy installation. Easily mount the LED Strip into LED World’s optional Aluminium Channel profiles. In addition, all of our Flex Strips come with 12″ (30.5cm) lead wires to be powered with our Class 2 power supply.

Size of roll and maximum length: 15.2 meter (50 feet) roll.

LED World’s Long run series LED Strip Lighting can be used for architectural lighting, cove lighting and many other applications where long continuous run required. Also can be cut at marked intervals for custom lighting requirements.

LED Strip available in Warm White and Neutral White Color.

Note: This product requires an optional Class 2 Power Supply (not included).

Note: Accessories are not included with this product. See Accessories tab.


Features

Continuous 50 ft (15.2m) long run
Dimmable via LED World’s optional dimming solutions
Double sided 3M tape
Constant Brightness
Low power consumption and little heat produced
Flexible LED light strips
Long life of high output LEDs
Solid state lighting
Super Bright 2835 SMD LEDs

Technical Specifications

Watt foot1.5 W/ft
Max Voltage24 VDC (regulated)
AMPs/Roll3.19 Amps
Brightness130-140 Lumens / ft
Roll Size15.2 Meters (50 feet)
Light Source60pcs/meter (39.37″) 2835 SMD LED
Dimensions15200(L) x 10(W) x 1(H)mm (50′ x 25/64″ x 0.03″)
Max Length15.2 Meters (50 feet)
LED Angle120°
Lamp Life>40,000 hours estimated average*
IP RatingIP20 Type A
MountSmooth Clean Surface – burrows free
Operating Temperature-25°C ~ +40°C (-13°F ~ +104°F)
CertificationscULus listed

Dimmable LED Drivers


Regulated LED Drivers

Accessories

  • 2 Pin Strip to Strip Clamp Connector – CL10BB-2G

    CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.

    Package includes 5pcs of connectors

  • 3 Terminal WAGO 222-413 Splicing Connector

    WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • DC10E Dice Connector Kit for LED Strip

    DC10E Dice end power connector makes it easy to attach two pigtail wires to a  single color 10mm wide LED strips. The kit includes 5 connectors with pigtail wires already attached and a mini screw driver. Use screw driver to tighten the connector to the strips PCB connection pads. Use only with LED World’s 10mm wide Type A Flex Strip (No coating or cover).

    Not compatible with the Evenbright Series.

    For Use with Class 2 Power Supplies: Max 5 Amps, 12/24V DC low voltage only.

  • Mini 2 Pin Strip to Power Clamp Connector – CL10XB-2

    Mini CL10XB-2 connector makes it easy to connect single color 10mm wide LED strip to wire in narrow space. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.

    Package includes 5pcs of connectors

  • 5 Terminal WAGO 222-415 Splicing Connector

    WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • DC10M Dice Connector Kit for 10mm LED Strip

    DC10M Dice middle connector makes it easy to join two single color 10mm wide LED strips together. The kit comes complete with 5 connectors and a mini screw driver. Use screw driver to tighten the connectors to the strips PCB connection pads. Use only with LED World’s 10mm wide Type A Flex Strip (No coating or cover).

    Not compatible with the Evenbright Series.

    Max 5 Amps, 12/24V DC low voltage only. Use only with Class 2 power supply.

  • 2 Pin Strip to Power Clamp Connector – CL10XB-2G

    CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.

    Package includes 5pcs of connectors

  • 4 terminal WAGO Connector H05-415

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

  • X Connector SX10

    SX10 Single color 8mm X Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

  • LED Low Voltage Mini Dimmer DIM-2430A

    Low voltage mini LED dimmer can dim 12 or 24VDC  LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.

  • Single Color Strip T Connector – S10-T2A

    S10-T2A 10mm T shape connector with cut marks for easy custom angle connection. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (No coating or cover). Max 3.5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.

    Package includes 5pcs of connectors

  • L Connector SL10

    SL10 Single color 10mm L corner Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.

  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

  • Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2

    Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.

    Package includes 5pcs of connectors

Aluminium Channel

  • Deep Aluminium Channel

    Deep LED Aluminium profile is 1 meter (3.28 feet) long. Width is 13.59mm and Height is 19.9mm.

  • Aluminium Profile Corner Round

    Length sizes for Corner Round LED Aluminium Channel is available in 1 meter length. Width is 16mm and Height is 16mm.

  • Aluminium Recessed Channel

    Recessed Aluminium Profile available in 1 meter (3.28 feet). Width is 17.1 mm and Height is 8.6mm.

  • Wide Standard Aluminium Channel

    Standard Wide Profile available in 1 meter (3.28 feet) long length. Width is 23.5mm and Height is 11mm.

  • Aluminium LED Profile Round AC-R008

    Aluminium profile round AC-R008 with PMMA Opal matter diffuser can be mounted with optional wall bracket to walls or can be hanged to create custom linear light Pendants up to 2 meters (6.56 ft) long. Round Aluminum profile available in 1 meter (3.28ft) and 2 meter (6.56ft) long length.

    Select options
    More info
  • Corner Cove Aluminium LED Profile AC-3030G

    The Corner Cove Aluminum LED profile AC-3030G with Opaque diffuser lens to create custom linear light Pendants up to 2 meters (6.56 ft) long. Can also be used in Wall Corner and cove lighting for unique Corner Lighting effect. Furthermore, Corner Cove Aluminum LED Profile comes with Opaque cover profile cover for spotless lighting effect. In order to hang on the ceiling use the optional suspension kit available in accessories section.

    Select options
    More info

Reviews

There are no reviews yet.

Be the first to review “50ft Long Run Tape light – FA60M28-15.2M-24V-X”

Your email address will not be published. Required fields are marked *