No Spot EvenBright COB LED Strip - HH-SCOBX-528-24

New Evenbright COB LED Flexstrip with no light spots. Unlike most standard LED Strips that have SMD LEDs, COB LED Strip comes with layer of phosphor coating for a spot free even light. The low voltage (24VDC) Quattro bright LED Strip Light does not require a channel profile cover to have spot free lighting. However, it is recommend as a protection from accidental damage.

The Evenbright No Spot COB LED Strip is cut-able at marked intervals (45.45mm/1.78″) and comes in 5 meter (16.4 feet) roll with a 3M tape backing for easy installation. It is suitable for dry location use. Mountable onto most flat, clean dry surfaces (ambient temperature) free of burrows, the LED Strips come with lead wires to be powered with our Class 2 power supply.

Ideal for use in applications for architectural lighting, concealed lighting, cabinet lighting and many other applications. The small size, low voltage and higher light distribution angle (135°) make this strip lighting ideal for a wide range of applications.

Connecting COB Strip to Clear connector video: Click Here
Connecting COB Strip to Clamp connector video: Click Here

Note: This product requires an optional Class 2 Power Supply (not included).

Note: Accessories are not included with this product. See Accessories section.

No Spot COB LED Strip Features

Phosphor layer on top of LEDs to remove spotting effect
Built-in linear light diffusion for even no spot lighting
Dimmable via LED World’s optional dimming solutions
Double sided 3M tape
Low power consumption and little heat produced
Flexible LED light strips
Long life of high output LEDs
Solid state lighting
CRI 90>

Technical Specifications

Watt foot	4.6 W/ft
Max Voltage	24 VDC (regulated)
AMPs/Roll	3.1 Amps
Brightness	400-460 Lumens / ft
Roll Size	5 Meters (16.4 feet)
Light Source	COB LED
Dimensions	5000mm(L) x 10mm(W) x 1.6mm(H) (16.4′ x 0.39″ x 0.07″)
Max Length	5 Meters (16.4 feet)
LED Angle	135°
Lamp Life	>16,000 hours estimated average*
IP Rating	IP20 type A
Mount	Smooth Clean Surface – burrows free (ambient temperature)
Operating Temperature	-25°C ~ +40°C (-13°F ~ +104°F)

Dimmable LED Drivers

288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
New efficient and reliable multi output 24VDC 288Watt (3 x 96W) Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming.
Compatible with Forward phase, Magnetic low voltage, ELV, Triac and 0-10V Dimmers (see compatibility list of dimmers).
Add to cart More info
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
New efficient and reliable multi output 24VDC 192Watt (2 x 96W) Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming.
Compatible with Forward phase, Magnetic low voltage, ELV, Triac and 0-10V Dimmers (see compatibility list of dimmers).
Add to cart More info
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
New efficient and reliable 24VDC 96Watt Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming.
Compatible with Forward phase, Magnetic low voltage, Triac and 0-10V Dimmers (see compatibility list of dimmers).
Add to cart More info
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
New efficient and reliable 24VDC 60Watt Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming.
Compatible with Forward phase, Magnetic low voltage, ELV, Triac and 0-10V Dimmers (see compatibility list of dimmers).
Add to cart More info

Regulated LED Drivers

96W 24VDC Class 2 LED Power Supply with Plug
96 Watt YHY-24004000 LED Class 2 24VDC Power Supply: AC/DC adapter, compact desktop sized, power supply for indoor use (dry) only. Features an input voltage of 100~240VAC, 50~ 60Hz and comes with a barrel type (coaxial) output connector (center is +).
96W LED power supply features short circuit protection, over current protection and over voltage protection.
Add to cart More info

Accessories

Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Package includes 5pcs of connectors
Add to cart More info
2 Pin Strip to Strip Clamp Connector – CL10BB-2G
CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Package includes 5pcs of connectors
Add to cart More info
2 Pin Strip to Power Clamp Connector – CL10XB-2G
CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Package includes 5pcs of connectors
Add to cart More info
3 Terminal WAGO 222-413 Splicing Connector
WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Add to cart More info
4 terminal WAGO Connector H05-415
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
Add to cart More info
DC10E Dice Connector Kit for LED Strip
DC10E Dice end power connector makes it easy to attach two pigtail wires to a single color 10mm wide LED strips. The kit includes 5 connectors with pigtail wires already attached and a mini screw driver. Use screw driver to tighten the connector to the strips PCB connection pads. Use only with LED World’s 10mm wide Type A Flex Strip (No coating or cover).
Not compatible with the Evenbright Series.
For Use with Class 2 Power Supplies: Max 5 Amps, 12/24V DC low voltage only.
Add to cart More info
Single Color Strip T Connector – S10-T2A
S10-T2A 10mm T shape connector with cut marks for easy custom angle connection. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (No coating or cover). Max 3.5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Package includes 5pcs of connectors
Add to cart More info
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
Add to cart More info
5 Terminal WAGO 222-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Add to cart More info
Mini 2 Pin Strip to Power Clamp Connector – CL10XB-2
Mini CL10XB-2 connector makes it easy to connect single color 10mm wide LED strip to wire in narrow space. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Package includes 5pcs of connectors
Add to cart More info
DC10M Dice Connector Kit for 10mm LED Strip
DC10M Dice middle connector makes it easy to join two single color 10mm wide LED strips together. The kit comes complete with 5 connectors and a mini screw driver. Use screw driver to tighten the connectors to the strips PCB connection pads. Use only with LED World’s 10mm wide Type A Flex Strip (No coating or cover).
Not compatible with the Evenbright Series.
Max 5 Amps, 12/24V DC low voltage only. Use only with Class 2 power supply.
Add to cart More info
LED Low Voltage Mini Dimmer DIM-2430A
Low voltage mini LED dimmer can dim 12 or 24VDC LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.
Add to cart More info
X Connector SX10
SX10 Single color 8mm X Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.
Add to cart More info
L Connector SL10
SL10 Single color 10mm L corner Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.
Add to cart More info

Aluminium Channel

Deep Aluminum Channel
Deep LED Aluminium profile is 1 meter (3.28 feet) long. Width is 13.59mm and Height is 19.9mm.
Add to cart More info
Aluminum Profile Corner Round
Length sizes for Corner Round LED Aluminium Channel is available in 1 meter length. Width is 16mm and Height is 16mm.
Add to cart More info
Aluminum Recessed Channel
Recessed Aluminium Profile available in 1 meter (3.28 feet). Width is 17.1 mm and Height is 8.6mm.
Select options

More info
Wide Standard Aluminum Channel
Standard Wide Profile available in 1 meter (3.28 feet) long length. Width is 23.5mm and Height is 11mm.
Add to cart More info
Aluminum LED Profile Round AC-R008
Aluminium profile round AC-R008 with PMMA Opal matter diffuser can be mounted with optional wall bracket to walls or can be hanged to create custom linear light Pendants up to 2 meters (6.56 ft) long. Round Aluminum profile available in 1 meter (3.28ft) and 2 meter (6.56ft) long length.
Select options

More info
Corner Cove Aluminum LED Profile AC-3030G
The Corner Cove Aluminum LED profile AC-3030G with Opaque diffuser lens to create custom linear light Pendants up to 2 meters (6.56 ft) long. Can also be used in Wall Corner and cove lighting for unique Corner Lighting effect. Furthermore, Corner Cove Aluminum LED Profile comes with Opaque cover profile cover for spotless lighting effect. In order to hang on the ceiling use the optional suspension kit available in accessories section.
Select options

More info