LED Flexible Tape Light - 5.8W Constant Current HH-S2835X-120-24V-C

Quattro Bright High Efficiency LED Strip with IC HH-S2835X-120-24V-C features high bright 2835 LEDs for a light output exceeding 540lm per foot lumens and even light output.

LED Strip requires a constant voltage 24VDC (optional) LED Driver and can be dimmed with a one of LED World’s Dimmable Class 2 LED Driver. Each interval section on the LED Strip has a IC chip to regulate the current allowing for long runs of the strip without voltage drops. The 5.5 watts per foot, is a high output lumen LED strip with even light output. The Type A (indoor) Flex Strip comes in 5 meters long (16.4 feet) roll and is ideal for LED lighting in cove applications where longer runs of lighting are needed.

With Constant Current IC for each section, there is no need for constant current driver. IC Regulated LED Strip HH-S2835X-120-24V-C works with Standard Class 2 DC24V constant voltage power supply. In addition. it also compatible with Dimmable LED Drivers. The LED Strip IC will convert 24VDC to CC (Constant Current) for the LEDs. The CC Strip can be cut like Standard Constant voltage strips.

LED Flex Strip Lighting has a 3M tape backing for easy installation.

Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The LED Strip can be easily mounted into LED World’s Aluminum Channel profiles.

Note: This product requires an optional Class 2 Power Supply (not included)
Note: Accessories not included with this product but available in accessories section

Features

Constant Current IC (regulated for long Life of LEDs)
High density of LEDs for even light output – 36 LEDs per foot
View Angle 120°
Package: 5 meters (16.4ft)
2835 SMD (Quattro Bright Series)
Can be cut to size at marked intervals
Flexible LED Light Strips
Solid-state, high vibration resistant
Dimmable
cULus Standard

Technical Specifications

Max Voltage	24 VDC (Class 2 Type power)
Watts/foot	5.5 Watts
Amps/Roll	3.6 Amps
Color Temp.	3100K(Warm White), 4200K(Neutral White), 5500K (Pure White)
Light Source	120pcs/meter (39.37″) 2835 LED
Dimensions	5000(L) x 10(W) x 1.2(H)mm (16.4′ x 3/8″ x 0.04″)
LEDs Type	2835 SMD LED
Max Length	5 meters (16.4 feet)
LED Angle	120°
Brightness	540 Lumens / ft (30.5 cm)
Bend Radius	Max 100mm (4″)
Lamp Life	>35,000 hours estimated average*
IP Rating	IP20 Type A

Dimmable LED Drivers

288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
New efficient and reliable multi output 24VDC 288Watt (3 x 96W) Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming.
Compatible with Forward phase, Magnetic low voltage, ELV, Triac and 0-10V Dimmers (see compatibility list of dimmers).
Add to cart More info
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
New efficient and reliable multi output 24VDC 192Watt (2 x 96W) Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming.
Compatible with Forward phase, Magnetic low voltage, ELV, Triac and 0-10V Dimmers (see compatibility list of dimmers).
Add to cart More info
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
New efficient and reliable 24VDC 96Watt Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming.
Compatible with Forward phase, Magnetic low voltage, Triac and 0-10V Dimmers (see compatibility list of dimmers).
Add to cart More info
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
New efficient and reliable 24VDC 60Watt Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming.
Compatible with Forward phase, Magnetic low voltage, ELV, Triac and 0-10V Dimmers (see compatibility list of dimmers).
Add to cart More info

Regulated LED Drivers

96W 24VDC Class 2 LED Power Supply with Plug
96 Watt YHY-24004000 LED Class 2 24VDC Power Supply: AC/DC adapter, compact desktop sized, power supply for indoor use (dry) only. Features an input voltage of 100~240VAC, 50~ 60Hz and comes with a barrel type (coaxial) output connector (center is +).
96W LED power supply features short circuit protection, over current protection and over voltage protection.
Add to cart More info

Accessories

X Connector SX10
SX10 Single color 8mm X Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.
Add to cart More info
Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Package includes 5pcs of connectors
Add to cart More info
5 Terminal WAGO 222-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Add to cart More info
DC10E Dice Connector Kit for LED Strip
DC10E Dice end power connector makes it easy to attach two pigtail wires to a single color 10mm wide LED strips. The kit includes 5 connectors with pigtail wires already attached and a mini screw driver. Use screw driver to tighten the connector to the strips PCB connection pads. Use only with LED World’s 10mm wide Type A Flex Strip (No coating or cover).
Not compatible with the Evenbright Series.
For Use with Class 2 Power Supplies: Max 5 Amps, 12/24V DC low voltage only.
Add to cart More info
Single Color Strip T Connector – S10-T2A
S10-T2A 10mm T shape connector with cut marks for easy custom angle connection. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (No coating or cover). Max 3.5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Package includes 5pcs of connectors
Add to cart More info
L Connector SL10
SL10 Single color 10mm L corner Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip.
Add to cart More info
4 terminal WAGO Connector H05-415
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
Add to cart More info
LED Low Voltage Mini Dimmer DIM-2430A
Low voltage mini LED dimmer can dim 12 or 24VDC LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.
Add to cart More info
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
Add to cart More info
DC10M Dice Connector Kit for 10mm LED Strip
DC10M Dice middle connector makes it easy to join two single color 10mm wide LED strips together. The kit comes complete with 5 connectors and a mini screw driver. Use screw driver to tighten the connectors to the strips PCB connection pads. Use only with LED World’s 10mm wide Type A Flex Strip (No coating or cover).
Not compatible with the Evenbright Series.
Max 5 Amps, 12/24V DC low voltage only. Use only with Class 2 power supply.
Add to cart More info
Mini 2 Pin Strip to Power Clamp Connector – CL10XB-2
Mini CL10XB-2 connector makes it easy to connect single color 10mm wide LED strip to wire in narrow space. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Package includes 5pcs of connectors
Add to cart More info
2 Pin Strip to Power Clamp Connector – CL10XB-2G
CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Package includes 5pcs of connectors
Add to cart More info
3 Terminal WAGO 222-413 Splicing Connector
WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Add to cart More info
2 Pin Strip to Strip Clamp Connector – CL10BB-2G
CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Package includes 5pcs of connectors
Add to cart More info

Aluminium Channel

Deep Aluminum Channel
Deep LED Aluminium profile is 1 meter (3.28 feet) long. Width is 13.59mm and Height is 19.9mm.
Add to cart More info
Aluminum Profile Corner Round
Length sizes for Corner Round LED Aluminium Channel is available in 1 meter length. Width is 16mm and Height is 16mm.
Add to cart More info
Aluminum Recessed Channel
Recessed Aluminium Profile available in 1 meter (3.28 feet). Width is 17.1 mm and Height is 8.6mm.
Select options

More info
Wide Standard Aluminum Channel
Standard Wide Profile available in 1 meter (3.28 feet) long length. Width is 23.5mm and Height is 11mm.
Add to cart More info
Aluminum LED Profile Round AC-R008
Aluminium profile round AC-R008 with PMMA Opal matter diffuser can be mounted with optional wall bracket to walls or can be hanged to create custom linear light Pendants up to 2 meters (6.56 ft) long. Round Aluminum profile available in 1 meter (3.28ft) and 2 meter (6.56ft) long length.
Select options

More info
Corner Cove Aluminum LED Profile AC-3030G
The Corner Cove Aluminum LED profile AC-3030G with Opaque diffuser lens to create custom linear light Pendants up to 2 meters (6.56 ft) long. Can also be used in Wall Corner and cove lighting for unique Corner Lighting effect. Furthermore, Corner Cove Aluminum LED Profile comes with Opaque cover profile cover for spotless lighting effect. In order to hang on the ceiling use the optional suspension kit available in accessories section.
Select options

More info