Water Resistant LED Flex Tape light – FC60M28-5M-12V-X

The new FC60M28-5M-12V-X LED strips features the new high power 2835 SMD LED that is 40% brighter than the 3528 SMD LED and that has a high lumen output of up to 100 lumens  per watt. The dimmable LED Strip is available in Neutral white (4000 to 4200K) and Warm White (2900 to 3100K). Silicon coated LED strip is ideal for use in damp location (IP68 rated). The low voltage (12VDC) LED strip can be cut at marked intervals (3 LED cutting points) and comes in 5 meter (16.4 feet) roll. It is suitable for dry locations and has a 3M tape backing for easy installation. It can be mounted onto most flat, clean dry surfaces free of burrows. All of our Flex Strips come with 12″ (30.5cm) lead wires to be powered with our Class 2 power supply.

Size of roll and maximum length: 5 meter (16.4 feet) roll

LED World’s LED Strip Lighting can be used for under counter lighting,  architectural lighting, cove lighting, toe kick lighting and many other applications. Its small size and low voltage makes this lighting ideal for a wide range of applications.

LED Strip available in Warm White/Pure White Color

Note: This product requires an optional Class 2 Power Supply (not included).


Features

Dimmable via LED World’s optional dimming solutions
Double sided 3M tape
Low power consumption and little heat produced
Flexible LED light strips
Long life of high output LEDs
IP68 rated for use in damp locations
Solid state lighting
Super Bright 2835 SMD LEDS

Technical Specifications

Roll Size5 Meters (16.4 feet)
Max Voltage12 VDC (regulated)
Watt foot2.2
AMPs/Roll 3 Amps
Light Source60pcs/meter (39.37″) 2835 SMD LED
Dimensions5000(L) x 12(W) x 4(H)mm (16.4′ x 0.47″ x 0.15″)
Max Length5 Meters (16.4 feet)
LED Angle120°
Brightness200-220 Lumens / ft
Lamp Life>25,000 hours estimated average*
IP RatingIP68 Type C
MountSmooth Clean Surface – burrows free
Operating Temperature-25°C ~ +40°C (-13°F ~ +104°F)

Dimmable LED Drivers

Regulated LED Drivers

Accessories

  • 4 terminal WAGO Connector H05-415

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

  • LED Low Voltage Mini Dimmer DIM-2430A

    Low voltage mini LED dimmer can dim 12 or 24VDC  LED Flex strips or LED bars from 0%-100% using Pulse Width Modulation (PWM). It has an easy to use control knob for variable brightness levels. Screw terminal connectors allow for quick and easy connection for power input and output. Maximum continuous load is 5 Amps.

  • 5 Terminal WAGO 222-415 Splicing Connector

    WAGO’s 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • 3 Terminal WAGO 222-413 Splicing Connector

    WAGO's 221-415 COMPACT Splicing Connector for all wire types set new standards. This new series is 40 % smaller and even more user-friendly than its successful predecessor, the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

Aluminium Channel

Reviews

There are no reviews yet.

Be the first to review “Water Resistant LED Flex Tape light – FC60M28-5M-12V-X”

Your email address will not be published. Required fields are marked *