Human Body Induction switch (LN-SPIR-1CH) senses the approaching person and activates attached LED lighting fixture.
The human body is an infrared detection sensor switch controller, that use of infrared detection to turn on/off low voltage LED lighting (12/24VDC). As a person approaches the sensor within 16 feet (5 meter) area, the sensor acts as a switch to turn on the attached optional LED lighting. After a person leaves the sensor area, the human body induction switch will turn off automatically according to the set time delay.
|Human body infrared sensor|
|Dimension: L76 X W35 X H34 mm (2.99″ x 1.37″ x 1.33″)|
|5 meter sensing distance area|
|Compatible 12/24VDC LED lighting fixture and class 2 regulated power driver|
Human Body Induction Switch Wiring Diagram
Directions for Use
|Turn power off before connecting lighting or power source. Please carefully check that the wire attached to the screw terminal are screwed in tight to avoid short circuit between connecting wires|
|Use the setting knob at the back of the controller to set the delay time to turn off after a person is away from the area|
|The controller signal output line and input line should be connected with the correct polarity and NOT exceed 5 amps.|