5CH DMX 512 Decoder 8 or 16 bit H-DMX2108A-5M-3

The H-DMX2108A-5M-3 is a 5-channel Low voltage DMX512 Decoder and Zone Controller (12V ~ 24VDC, 8A per channel output).
H-DMX2108A-5M-3 DMX decoder can be used in conjunction with a master DMX controller (Such as a HUEDA™ and STICK-D3) to control 1 run of low voltage RGB LED lighting (for each H-DMX2108A-5M-3).

When used with other DMX decoders, multiple runs can be coordinated to work together in perfect synchronization or be configured in zones.
Uses universal standard DMX512/1990.

Uses 5 channels with 256 shades of brightness. Indoor use only.
For more operation and setup details please refer Product Specs and Instruction PDF.
Important note: The maximum length of RGB/W LED Flex Strip attached to DMX Decoder should not exceed 20 linear feet (due to voltage drop resulting in color loss).


Features

DMX 512 decoder, RDM function can inter-communicate between DMX master and decoder. e.g. you can set DMX decoder’s address by DMX master console
Metal housing, digital display for address data, easily to set and show DMX address
Multiple DMX in/out ports: RJ 45, XLR  and hardwired screws terminals
Total 5 PWM output channels, common anode. Adjustable DMX channel quantity from 1CH~5CH
Adjustable PWM output resolution ratio 8bit , 16bit (for professional color accuracy)
Adjustable output PWM frequency from 500HZ ~ 9K HZ
Adjustable output dimming curve gamma value from 0.1 ~ 9.9
Adjustable decoding mode

Technical Specifications

Input voltage12V – 24V DC (Use only with Class 2 regulated Power Supply)
Output5 Channels
External dimensionL164 x W73 x H38 mm (6.45″ x 2.87″ x 1.49″)
Output current5 x 8A
Output power5 x (96~288)W
CertificationsCE, cRUus, rohs, FCC
Operating temperature-20°C~40°C (-4°F~104°F ) Indoor  (dry location)

12VDC Power Supplies

24VDC Power Supplies

Accessories

  • Wireless DMX Pen Transmitter

    Wireless DMX 3-pin XLR Male connector- Transceiver. LC-512x-M works with LC-840-DMX and transmits signal to LC-512x-F.

    Add to cart More info
  • RGB 2464 Wire

    Low voltage 20 Gauge / Meter cord. Comes in 16.40 feet length. RGB Power cord with pigtail wires on both ends

    Add to cart More info
  • RGBW 2464 Wire

    Low voltage 20 Gauge / Meter cord. Comes in 16.40 feet length. RGBW Power cord with pigtail wires on both ends

    Add to cart More info
  • Wireless DMX Pen Receiver

    Wireless DMX 3-pin XLR Female connector- Receiver. LC-512x-F works with LC-840 and receives signal from LC-512x-M.

    Add to cart More info
  • DMX Touch Panel RGB/RGBW LED Controller HUEDA™

    HUEDA™ multi-zone DMX Touch Panel Master Color controller features easy to touch and control colors, brightness and color changing speed effects.

    Add to cart More info
  • HUEDA™ Hub Wifi & DMX Color Controller H-2818WIN

    The H-2818WIN HUEDA™ Hub (master) is a WiFi/RF color controller that allows you to control color changing of RGB and RGBW LED Lighting through DMX standard or wireless Hueda RF color receivers.

    Add to cart More info
  • LED Color Controller STICK-DE3

    The third generation STICK with an Integrated color display. It is compatible with all Nicolaudie computer software and mobile apps. 

Reviews

There are no reviews yet.

Be the first to review “5CH DMX 512 Decoder 8 or 16 bit H-DMX2108A-5M-3”

Your email address will not be published. Required fields are marked *